1. Ensure that the pre placement surface is flat and place the shock absorber at the bottom of the equipment. Installation method one: Place the marble tabletop directly above the shock absorber. Method two: First, fix the fixed seat of the shock absorber to the equipment, and then place the equipment and the fixed seat as a whole directly above the diaphragm.

2. Connect the pipeline, connect the air source, adjust the pressure value of the filter pressure regulating valve to 0.1MPa, observe the height of the shock absorber after inflation, and raise it by 5-7mm. (The unloaded height of the shock absorber is 80mm, and the height after inflation is 85-87mm)

3. Frequent inflation and deflation can be achieved by sequentially rotating the adjustment nuts on the horizontal adjustment valves of each shock absorber to adjust the height (clockwise for lowering, counterclockwise for raising).

Thin film air floating shock absorber, suitable for electron microscopes, optical microscopes, 3D measuring instruments, roughness testers, hardness testers, automotive parts related testing equipment, etc

Jianli Shock Absorber Manufacturing Co., Ltd. is committed toThe research and production of various types of vibration reduction products for electromechanical equipment includes five categories: spring shock absorbers, rubber shock absorbers, thin film air floating shock absorbers, air cushion shock absorbers, steel wire rope shock absorbers, etc., with thousands of specifications, widely covering the field of vibration reduction for electromechanical equipment. At the same time, Jianli Company also provides vibration reduction technology services such as on-site testing, scheme design, and product customization.