1. Our company designs vibration reduction pedestal drawings based on the specific equipment conditions

Clearly define the options and layout of pedestal frame, steel bars, limiters, and dampers

After confirmation by the customer, it will be sent as an attachment to the contract together with the customer

2. Choose whether to pour according to the actual situation

The unfinished payment has a short construction period, is lightweight and convenient for transportation, and requires on-site pouring of concrete.

After the pouring payment is transported to the site, it can be directly put into use

3. Choose whether to reserve anchor bolt holes for the water pump

Precautions for using anchor bolts:

Measure the overall length, buckle length, and diameter of the anchor bolts before installation

Usually, customers install it themselves after receiving the goods

Installation method: Place the anchor bolts into the reserved holes, pour in concrete mortar and wait for solidification

4. Do steel plates need to be welded at the bottom

Some customers require a layer of galvanized iron plate to be welded to the bottom of the pedestal frame.

There is not much difference between adding steel plates at the bottom and pouring concrete directly into the frame during use.

The customer has a requirement that the bottom welded steel plate can be customized after prior communication.